How To Repair Aluminum Siding On A House

Learn how to repair aluminum siding and patch holes both big and small! This step by stride tutorial will testify you how to fix holes in aluminum siding easily!

After moving the electric meter to a new location, we were left with a big hole in our aluminum siding. A temporary patch was put in place and the whole matter was forgotten about for years. Today, I'm showing you how to repair aluminum siding and ready holes both big and small!

This post contains affiliate links for your convenience. Purchases fabricated through these links may earn me a small committee at no boosted cost to y'all. Please visit my disclosures page for more than data.

This eyesore on the back of the business firm has been bothering me for ages, just it always got pushed downward the to-exercise list. Now that I'one thousand giving the backyard a makeover, it's time to fix it upwards!

Materials Needed to Repair Aluminum Siding

• Electric metal shears
• Metal snips
• Fleck aluminum siding
  • Nosotros saved the siding that was removed when we turned a window into a sliding drinking glass door for our new deck. If you don't take extra and tin can't find an verbal friction match, endeavor taking a piece from the back of a shed or garage, then supplant it with something visually similar in the inconspicuous location.
• Waterproof repair tape
  • This stuff is amazing! It forms a watertight bond that tin be used to seal up gaps and holes in aluminum siding.
• Gutter sealant
  • Used to seal upwardly seams and gaps in cut edges of aluminum siding.
• Aluminum repair epoxy
  • Perfect for filling smaller holes from screws, nails or bolts.
• Latex gloves for working with sealant and epoxy.
• Cut resistant work gloves for handling sharp edges of aluminum.

Don't forget your safety gear! Here are my recommendations for safety glasses and ear protection. No excuses!

How to Repair Aluminum Siding

Cut away the damaged expanse

First, I ripped down everything covering the pigsty and removed the weird frame with a crowbar.

It looks pretty scary, but I'm relieved there weren't any creepy-awesome things or water impairment inside. I used an oscillating multi-tool like this i to cut the framing back to exist level with the surrounding walls, and then attached a ¼" plywood bankroll with brad nails.

Apply waterproof repair tape to edges

I wanted to cover up those gaps for extra insurance against wet or insects. This stuff bonds to aluminum and other surfaces for a h2o tight seal, while still allowing for expansion and contraction as the temperature changes.

I applied the tape around the entire hole, overlapping it with the intact siding an inch or 2. This had the added benefit of holding down the edges of the existing siding that had curled upwards slightly over time.

Cut off the flange from the bottom strip of siding

Try as I might, I just couldn't go the interlocking flanges at the bottom of the existing siding to come autonomously. I even got one of these siding removal tools to pop them loose, merely it wouldn't budge!

So instead, I cut off the bottom flange from the first strip of siding. Electric metal shears make this process soooo much easier than mitt shears!

I traced the shape of the conduit onto the dorsum and cut information technology out with the same shears. I likewise cut away the nailing strip on the top where it volition overlap with the existing siding.

It took a few trips back and forth to the shop to get the fit right, simply information technology finally slid into place!

Apply Gutter Sealant to Back Edges

The onetime siding wasn't in the best shape later getting ripped off the wall, so there are a few dents along the edges. I used gutter sealant like a glue to hold the edges of the patch to the existing siding.

Put on latex gloves first, because yous don't desire this stuff on your skin! Run a bead of sealant along all the cutting edges except the nailing strip at the top.

Then printing the siding piece in place. Once it holds in place on its ain, drive nails through the nailing strip and into the backing. The siding should hang on the nails slightly so that information technology can expand and contract with the weather (metal expands in the heat!)

Work your fashion upwards the wall

The next few pieces only needed notches cutting out on the ends so information technology could slide under the existing siding. I was getting into a groove at this point and forgot to take photos of the notches. Oops!

One time you get to the top, cut off the nailing strip the same way you cut off the bottom flange. Effort to make this cut every bit close to the edge of the strip as possible and then it lines up with the underside of the existing siding.

Seal all edges with gutter sealant or silicone

To forbid insects from working their mode nether the siding, I sealed all the edges with more gutter sealant. It might have been overkill, only I'd rather have to deal with touching upwardly paint than a hive of bees in the walls!

Brand sure your sealant says it allows for seasonal motion, or you'll get buckling in the summertime when the metal expands!

Fill up smaller holes with aluminum repair epoxy

While I was at it, I decided to remove the old hose holder from the wall in this area. I'll be moving my potting bench to that spot, which already has a hose reel on the side.

After unscrewing it from the siding, I was left with a few smaller holes in the aluminum siding to patch upwardly.

Don your latex gloves again, then pull off a small chunk of aluminum repair epoxy from the tube. Mix the two components together thoroughly, then button the putty into the pigsty with your fingertip.

Pare off any excess and so the patch is affluent with the forepart of the aluminum siding. Work fast, considering this stuff sets up quick!

Bear upon up pigment

Once the sealant and epoxy cures (check the label for cure times), you can bear upon up the pigment in the repaired areas. If you don't have any house paint, bring a small piece of the replacement siding to the paint store to exist color matched.

I cleaned the aluminum siding in this area start, so painted the repaired section and the gray conduit so information technology all blends into the original siding. While it's certainly not perfect, it's improve than the before!

The repaired area is still obvious because all the seams line upwardly. I'll be hiding this wall behind a vertical planter, then information technology won't be seen. If your area to be repaired is in a loftier visibility spot, I advise staggering the seam lines or lining them up with a window or door.

A professional siding installer has the tools to cut aluminum siding without that crash-land on the ends, merely I'thousand no professional person! 😉 I'chiliad just relieved to finally have this aluminum siding repair complete! Now I can rest easy knowing that our abode is watertight and non being invaded by insects!

---

Cheque out these other home comeback projects!

Source: https://www.thehandymansdaughter.com/how-to-repair-aluminum-siding/

Posted by: davisbronge1978.blogspot.com

Share this post