What Do You Use To Repair Loose Roof Shingles

Your roof needs to be able to resist hot and cold temperatures, high winds, and moisture conditions. As before long as the elements lift or damage any shingles, yous'll need to make repairs a top priority. Otherwise, your roof could lose more shingles and h2o will impairment the sheathing. Learning how to fix loose shingles should merely crave an hour or ii of your fourth dimension. As with all roof repairs, you should act with circumspection when using a ladder and working in loftier places. Your ladder needs to extend beyond the roof border and have stable footing.

Tools and Materials

Ideally, you'll accept a few shingles left from the concluding time that your roof was replaced. If not, buy a packet of shingles that matches your existing roof as closely as possible.

• Ladder
• Hammer
• Pry bar
• Utility knife
• Trowel
• Rag
• Roofing cement
• Replacement shingles
• 1-three/4 inch galvanized roofing nails

How to Set up Loose Shingles Directions

1. Gently lift the shingle tabs covering the nails holding the loose shingles.
2. Ease the notched end of the pry bar beneath the damaged shingle and lift each nail slightly.
3. Position the pry bar on acme of the loose shingle and catch each lifted boom.
4. Button on the pry bar or hit information technology with a hammer to pull the nail out completely.
   1. Repeat this process with each shingle.
   2. Nails going through the row of undamaged shingles higher up the loose ones should be securing the lower row besides.
   3. Gently lift the undamaged shingles and remove the nails holding the lower row.
5. Pull off or cutting away damaged shingles with a utility knife.
6. If you see cracks or tears in the roofing paper, seal them with roofing cement.
7. Spread covering cement with trowel and wipe with a rag.
8. Fit new shingles into place. Cut pieces with utility pocketknife as necessary to position new pieces.
9. Put roofing cement beneath new shingles to ensure they stick down.
10. Use the holes where you lot removed the original nails when nailing new shingles.
11. Be sure to nail back downwardly whatsoever undamaged shingles that had to be loosened to release damaged shingles.
12. Seal each blast head with a bit of roofing cement.

Professional person Roof Repairs

All-encompassing shingle damage or rotted capsule calls for more than merely replacing a few shingles. The good roofers at PJ Fitzpatrick know how to fix loose shingles or any roof harm. Enquire us for a roof repair guess today.

Source: https://www.pjfitz.com/diy/roof-repair/how-to-fix-loose-shingles/

Posted by: davisbronge1978.blogspot.com

Share this post